General Description


Designed exclusively for lift tables, this power unit consists of high pressure gear pump, AC motor, multi-functional manifold, valves, tank, etc. Start the motor to fulfill the lifting function while the lowing movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve.
 

Outline Dimension

 

 
 

Model Specifications

 

Remark: 1.  Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. The manual override function is available on request.
3. 60HZ motors with CSA or UL certification are available upon request. 

Special notes


1. The power unit is of S3 duty, which can only be worked intermittently, ie., 1minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended.
4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5. The power unit should be mounted horizontally.